Simultaneous determination of ten organophosphate pesticide residues in fruits by gas chromatography coupled with magnetic separation

In this study, γ‐Fe₂O₃/chitosan magnetic microspheres were synthesized and evaluated by X‐ray diffraction, SEM, thermogravimetric analysis, and static and kinetic adsorption experiments. Results showed that the magnetic microspheres exhibited good adsorption ability, and offered fast kinetics for the adsorption of trichlorfon, methamidophos, malathion, methyl parathion, dimethoate, omethoate, phosphamidon, phorate, isocarbophos, and chlorpyrifos. Based on magnetic separation, a simple method of magnetic SPE coupled to GC for the simultaneous determination of ten trace organophosphate pesticide residues was developed. Under the optimal conditions, the enrichment factor for ten organophosphorus pesticides was 10.1–364.7 and linear range was 0.001–10.0 mg/L. The LOD (S/N = 3) of the method for the ten pesticides was 0.31–3.59 μg/kg. The RSD for three replicate extractions of spiked samples was between 2.5 and 6.3%. The pear and apple samples spiked with ten organophosphate pesticides at 20 and 200 μg/kg levels were extracted and determined by this method with good recoveries ranging from 79.9 to 98.7%. Moreover, the method has been successfully applied for the determination of the ten organophosphate pesticide residues in peach samples.     

Determination of the n‐octanol/water partition coefficients of weakly ionizable basic compounds by reversed‐phase high‐performance liquid chromatography with neutral model compounds

A strategy to utilize neutral model compounds for lipophilicity measurement of ionizable basic compounds by reversed‐phase high‐performance liquid chromatography is proposed in this paper. The applicability of the novel protocol was justified by theoretical derivation. Meanwhile, the linear relationships between logarithm of apparent n‐octanol/water partition coefficients (logK_ow′′) and logarithm of retention factors corresponding to the 100% aqueous fraction of mobile phase (logk_w) were established for a basic training set, a neutral training set and a mixed training set of these two. As proved in theory, the good linearity and external validation results indicated that the logK_ow′′–logk_w relationships obtained from a neutral model training set were always reliable regardless of mobile phase pH. Afterwards, the above relationships were adopted to determine the logK_ow of harmaline, a weakly dissociable alkaloid. As far as we know, this is the first report on experimental logK_ow data for harmaline (logK_ow = 2.28 ± 0.08). Introducing neutral compounds into a basic model training set or using neutral model compounds alone is recommended to measure the lipophilicity of weakly ionizable basic compounds especially those with high hydrophobicity for the advantages of more suitable model compound choices and convenient mobile phase pH control.     

Self‐Assembly of Five 8‐Hydroxyquinolinate‐Based Complexes: Tunable Core,Supramolecular Structure,and Photoluminescence Properties

Five new Zn^II complexes, namely [Zn₃(L)₆] ( 1 ), [Zn₂(Cl)₂(L)₂(py)₂] ( 2 ), [Zn₂(Br)₂(L)₂(py)₂] ( 3 ), [Zn(L)₂(py)] ( 4 ), and [Zn₂(OAc)₂(L)₂(py)₂] ( 5 ), were prepared by the solvothermal reaction of ZnX₂ (X^?=Cl^?, Br^?, F^?, and OAc^?) salts with a 8‐hydroxyquinolinate ligand (HL) that contained a trifluorophenyl group. All of the complexes were characterized by elemental analysis, IR spectroscopy, and powder and single‐crystal X‐ray crystallography. The building blocks exhibited unprecedented structural diversification and their self‐assembly afforded one mononuclear, three binuclear, and one trinuclear Zn^II structures in response to different anions and solvent systems. Complexes 1 – 5 featured four types of supramolecular network controlled by non‐covalent interactions, such as π???π‐stacking, C? H???π, hydrogen‐bonding, and halogen‐related interactions. Investigation of their photoluminescence properties exhibited disparate emission wavelengths, lifetimes, and quantum yields in the solid state.     

Simulation of nuclide migration in a middle- and low-level radioactive waste repository based on GMS

Journal of Radioanalytical and Nuclear Chemistry - Groundwater is the most important factor contributing to the diffusion and migration of radionuclides in the repository. In this paper, the...     

Double-emulsion templated macroporous cellulose microspheres as a high-performance chromatographic media for protein separation

Cellulose - Cellulose microspheres are commonly chromatographic media yet seriously limited in biomacromolecules separation and purification due to the slow mass transfer kinetics resulting from...     

Effects of Coverage,Water, and Defects on Catechol/TiO2 Interface

Catechol adsorbed on TiO₂ is one of the simplest models to explore the relevant properties of dye-sensitized solar cells. However, the effects of water and defects on the electronic levels and the excitonic properties of the catechol/TiO₂ interface have been rarely explored. Here, we investigate four catechol/TiO₂ interfaces aiming to study the influence of coverage, water, and defects on the electronic levels and the excitonic properties of the catechol/TiO₂ interface through the first-principles many-body Green's function theory. We find that the adsorption of catechol on the rutile (110) surface increases the energies of both the TiO₂ valence band maximum and conduction band minimum by approximately 0.7 eV. The increasing coverage and the presence of water can reduce the optical absorption of charge-transfer excitons with maximum oscillator strength. Regarding the reduced hydroxylated TiO₂ substrate, the conduction band minimum decreases greatly, resulting in a sub-bandgap of 2.51 eV. The exciton distributions in the four investigated interfaces can spread across several unit cells, especially for the hydroxylated TiO₂ substrate. Although the hydroxylated TiO₂ substrate leads to a lower open-circuit voltage, it may increase the separation between photogenerated electrons and holes and may therefore be beneficial for improving the photovoltaic efficiency by controlling its concentration. Our results may provide guidance for the design of highly efficient solar cells in future.     

MOFs/水凝胶复合材料的制备及其应用研究

金属有机框架(MOFs)具有大量的孔隙结构和活性位点,在气体吸附、催化、医疗等领域均发挥了巨大的作用。MOFs是晶体粉末,具有脆性较大、在水中易分解和不易回收等缺点,从而限制了其应用。通过MOFs与柔性高分子的复合,特别是与水凝胶的复合,极大地改善了复合材料的柔顺性、可回收和可加工性等特性,进一步拓宽了MOFs的应用领域。本文详细阐述了基于水凝胶MOFs原位生成法、MOFs /水凝胶同时生成法和水凝胶包裹MOFs法等三种不同方法制备MOFs/水凝胶复合材料的研究进展,并对上述三种制备方法的特点及其产物特征进行了总结,进一步归纳了复合材料在生物医药、催化、废水处理和气体吸附等领域的应用。最后,对MOFs/水凝胶复合材料制备方法的改进和复合材料应用前景进行了深入讨论和展望。     

O2 dissociative adsorption on the Cu‐, Ag‐, and W‐doped Al(111) surfaces from DFT computation

The O₂ adsorption and dissociation on M‐doped (M = Cu, Ag, W) Al(111) surface were studied by density functional theory. The adsorption energy of adsorbate, the average binding energy and surface energy of Al surface, and the doping energy of doping atom were calculated. All the doped atoms can be stably combined with Al atoms, while being slightly embedded in the surface to a certain depth. The TOP‐type surfaces are the most stable doped surfaces for O₂ adsorption, which is related to the orbital hybridization between the adsorbate and the surface atoms, the electronegativity, and the orbital energy level of the doping atoms. Moreover, the O atoms and doping atoms contribute significantly to the density of states (DOS), especially the O‐p orbital electrons and the d orbital electrons of doping atoms. The degree of O₂ dissociation is related to the doping atoms on Al surfaces, and the doping atoms actually resist the dissociation of O₂. W atoms have the best resistance effect on the O₂ dissociation as compared with Cu and Ag atoms, especially W‐1NN surface, which has both large barrier energy and reaction energy.     

Efficient domino strategy for synthesis of 3-substituted 1,5-dihydro-4H-pyrrolo[3,2-c]pyridin-4-one derivatives

A series of 1,5-dihydro-4H-pyrrolo[3,2-c]pyridin-4-one derivatives with 3-(4-hydroxy-2-oxo-2H-pyran-3-yl) groups were synthesized via a one-pot three-component reaction of 4-aminopyridin-2(1H)-ones, 2,2-dihydroxy-1-arylethan-1-ones, and 4-hydroxy-2H-pyran-2-ones in water. This strategy not only provides a valuable tool in the design and synthesis of new hydrogenated pyrrolo[3,2-c]pyridines but also has the advantages of inexpensive starting materials, atom and step economy, environmental friendliness, good to excellent yields, and operational simplicity. A total of 14 examples were examined to show a broad substrate scope and high yields.